SCB Series Epoxy Dry-Type Transformer Produced

SCB series epoxy dry-type transformer produced is an air-insulated transformer that uses dry insulation technology instead of oil as an insulating medium. 

The following is the general structure of SCB dry-type transformers: 

1. Insulation material: SCB transformers use insulation materials instead of traditional oil-immersed insulation. Commonly used insulation materials include dry insulation paper, insulating plywood, etc. These materials can effectively resist electrical breakdown and provide reliable insulation performance. 

2. Coil: The windings of the transformer are usually made of highly conductive copper or aluminum wires to improve conduction efficiency. The coils are divided into high-voltage windings and low-voltage windings. 

3. Dry insulation system: SCB transformers use air insulation and dry insulation technology to eliminate the use of liquid insulation (such as oil). This reduces maintenance costs and improves safety. 

4. Radiator: In order to dissipate the heat generated inside the transformer, a radiator is usually set on the surface of the transformer. This helps to maintain the transformer operating within the normal temperature range. 

5. Housing: The outside of the transformer is usually surrounded by a metal housing to provide mechanical protection and protection. This housing is usually sealed to prevent moisture, dust and other contaminants from entering the transformer.

6. Temperature control system: To ensure that the transformer operates within the appropriate temperature range, it may be equipped with a temperature control system such as a temperature sensor and a fan.

7. SCB series epoxy dry-type transformer produced has some advantages in environmental protection and fire resistance because it does not use oil. They are commonly used in some special environmental requirements or occasions where higher safety is required. The specific design and specifications of the

 transformer may vary depending on the manufacturer and application.

Model Description

Main Technical Parameters

Working Environment：

Timetric Electric SCB series epoxy dry-type transformer produced use environment:

1. Altitude above sea level should not exceed 1000m.

2. Ambient temperature:

a. Maximum temperature +40℃.

b. Maximum daily average temperature +30℃.

c. Maximum annual average temperature +20℃.

d. Minimum temperature -30℃ (applicable to outdoor transformers).

e Minimum temperature -5℃ (applicable to indoor transformers).

3. Waveform of power supply voltage: The waveform of power supply voltage is similar to sine wave.

4. Symmetry of multi-phase power supply voltage: The power supply voltage connected to the multi-phase transformer should be approximately symmetrical.

Features and advantages of transformers

Features and Benefits ofSCB series epoxy dry-type transformer produced:

1. Energy saving and low noise: With the introduction of new low-consumption silicon steel sheets, foil winding structures, stepped core joints, environmental protection requirements, in-depth noise research, and computer optimization design and other new materials, new processes, and new technologies, the future dry-type transformers will be more energy-saving and quieter.

2. High reliability: Improving product quality and reliability will be people's unremitting pursuit.

3. Large capacity: From 50-2500kVA distribution transformers to 10000-20000kVA/35KV power transformers, with the continuous increase in urban power load, urban network regional substations are increasingly penetrating into urban central areas, residential areas, large factories and mines and other load centers, and 35kV large-capacity community center power supply power transformers will be widely used.

4. Multifunctional combination: From a single transformer to a multifunctional combined transformer with air cooling, protective housing, temperature computer interface, zero-sequence transformer, power metering, enclosed busbar and side outlet.

5. Development in multiple fields: From mainly distribution transformers, to power station transformers, excitation transformers, subway traction rectifier transformers, high-current furnace transformers, nuclear power plants, special transformers for ships and oil platforms and other multi-purpose fields.

Product Real Shot

FAQ

Can your company provide customizedSCB series epoxy dry-type transformer produced?

Of course, please provide all the requirements of the oil-immersed transformer as much as possible, such as: voltage, capacity, voltage ratio, frequency, product application range, cooling method, etc.

What is your fastest delivery time?

Under normal circumstances, we accept customer inquiries, communicate and confirm the specific parameters of the oil-immersed transformer, and the actual production time is determined according to the purchase quantity.

How is your after-sales service?

We support a 1-year warranty. The normal quotation does not include on-site after-sales service. Free online communication and guidance are available.